Piston Pins
WARNING: This page is about a different variant/trim than selected.
- Measure the diameter of the piston pin.
Piston pin diameter:
19.997 - 20.000 mm (0.78728 - 0.78740 in.)
- Measure the piston pin-to-piston clearance.
Piston pin-to-piston clearance:
0.004 - 0.012 mm (0.00016 - 0.00047 in.)
- Check the clearance between the piston pin outer diameter and the connecting rod small end inner diameter.
Piston pin-to-connecting rod clearance:
0.007 - 0.016 mm (0.00028 - 0.00063 in.)