LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 26 (Charging System - 2.0L) >> DC DC Converter >> Repair Procedures >> Removal >> [200W]

Repair Procedures: Removal: [200W]

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the crash pad center panel.

    (Refer to Body - "CRASH PAD CENTER PANEL ")

  3. Disconnect the DC/DC converter connector (A), and then loosening the mounting bolt and nut (B).
  4. Remove the DC/DC converter.
    G13283640Courtesy of KIA MOTORS AMERICA, INC.