LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Cylinder Head Assembly - 2.0L) >> Cylinder Head >> Repair Procedures >> Disassembly

Repair Procedures: Disassembly

WARNING: This page is about a different variant/trim than selected.
NOTE: Identify, valves and valve springs as they are removed so that each item can be reinstalled in its original position.
  1. Remove the valves.
    1. Using the SST (09222-3K000, 09222-3K100), compress the valve spring and remove the retainer lock (A).

      Information 

      When installing the SST, insert the front support (A) directly into the bolt hole on the cylinder head.

      G13283438Courtesy of KIA MOTORS AMERICA, INC.
      NOTE: Do not press valve retainer more than 12 mm (0.47 in.).
    2. Remove the spring retainer (B).
    3. Remove the valve spring (C).
    4. Remove the valve (D).
    5. Using needle-nose pliers, remove the valve stem seal (E).
      G13283439Courtesy of KIA MOTORS AMERICA, INC.
      NOTE: Always use a new valve stem seals.
scientia non olet · About LEMON Manuals