LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Hydraulic System - 2.0L) >> Drive Pulley Control Solenoid Valve (Primary_VFS) >> Repair Procedures >> Component Inspection

Component Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Ignition Switch "OFF".
  2. Disconnect the battery negative ( - ) cable.
  3. Remove the air cleaner

    (Refer to Engine Mechanical System - AIR CLEANER

  4. Disconnect the IVT main connector (A).
    G00599904
  5. Measure the resistance between power terminal (10) and signal terminal (8).

    Specification :  5.3± 0.3Ω

    G00599905
scientia non olet · About LEMON Manuals