LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Hydraulic System - 2.0L) >> Damper Clutch Control Solenoid Valve (D/C_VFS >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE:
  • Intelligent Variable Transmission (IVT) is composed of delicate components. Be careful not to cause any damage on the component when assembling and disassembling.
  • Maintain clean condition so that foreign substance does not get into the Intelligent Variable Transmission (IVT).
  • Use a coated apron, latex gloves, and stainless tray to prevent foreign substance from getting into the Intelligent Variable Transmission (IVT).
  1. Remove the E-Module.

    (Refer to IVT Control System - E-MODULE

  2. Remove the support bracket (A ) after removing the bolts
    G00599906
  3. Remove the damper clutch control solenoid valve (A).
    G00599907
scientia non olet · About LEMON Manuals