Special Service Tools

WARNING: This page is about a different variant/trim than selected.

Tool Name/Number	Illustration	Description
Crankshaft front oil seal installer 09231-2E000	Courtesy of KIA MOTORS AMERICA, INC.
Valve stem seal installer 09222-2E000	Courtesy of KIA MOTORS AMERICA, INC.
Valve spring compressor 09222-3K000 (Compressor) 09222-3K100 (Holder)	Courtesy of KIA MOTORS AMERICA, INC.	Used for removing/installing intake or exhaust valve
Crankshaft rear oil seal installer 09214-2E000 (Installer) 09231-H1100 (Handle)	Courtesy of KIA MOTORS AMERICA, INC.
Ring gear stopper 09231-3N100 09231-2B100	Courtesy of KIA MOTORS AMERICA, INC.	Used for keeping ring gear from rotating when removing/installing crankshaft pulley bolt
Ring gear stopper 09231-3D100 09231-2W100	Courtesy of KIA MOTORS AMERICA, INC.	Used for keeping ring gear from rotating when removing/installing crankshaft pulley bolt
Oil pan remover 09215-3C000	Courtesy of KIA MOTORS AMERICA, INC.
Tensioner stopper pin 09240-2E100	Courtesy of KIA MOTORS AMERICA, INC.	Used for holding compressed piston of tensioner
Oil filter wrench 09263-2E000	Courtesy of KIA MOTORS AMERICA, INC.	Used for removing/installing oil filter
Steel ball Installer 0K221-2M100	Courtesy of KIA MOTORS AMERICA, INC.	Used for Installing steel ball