LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Integrated Central Control Unit Diagnosis) >> DTC C166D-00: CAN Time-Out HUD >> Wiring Inspection >> Circuit Inspection

Circuit Inspection

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
G13289232Courtesy of KIA MOTORS AMERICA, INC.
G13289233Courtesy of KIA MOTORS AMERICA, INC.
Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
  1. Ignition "OFF".
  2. Disconnect the electrical connector(s) from the concerned component.
  3. Ignition "ON".
 HUD 2, 3 (power) Chassis ground - B+
  1. Ignition "OFF".
  2. Disconnect the electrical connector(s) from the concerned component.
 HUD 11, 12 (ground) Chassis ground - Approx. below 1Ω
  1. Ignition "ON".
 HUD 7 (C-CAN high) Chassis ground - Fig.1
HUD 8 (C-CAN low) Chassis ground -
  1. Ignition "OFF".
  2. Disconnect battery (-) cable.
  3. Disconnect the electrical connector(s) from the concerned component.
 ICU 9 (C-CAN high) ICU 10 (C-CAN low) Approx. 60Ω
HUD 7 (C-CAN high) HUD 8 (C-CAN low) Approx. 60Ω
ICU 9 (C-CAN high) HUD 7 (C-CAN high) Approx. below 1Ω
ICU 10 (C-CAN low) HUD 8 (C-CAN low) Approx. below 1Ω
G13289234Courtesy of KIA MOTORS AMERICA, INC.

Good 

No Good 

scientia non olet · About LEMON Manuals