LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Advanced Smart Cruise Control Diagnosis) >> DTC C1211-81: Wheel Speed Sensor Rear-RH Invalid/No Signal >> System Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: * Perform the "Variant Coding" and "Radar Sensor Alignment (SCC/AEB)" on "Vehicle S/W Management", once SCC ECU is replaced.
* Do not select the [C1] in "Radar Sensor Alignment (SCC/AEB)", unless you have proper equipment to perform inline procedure.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS to "Data Link Connector (DLC)".
  2. Perform "Vehicle S/W Management" of concerned component with KDS.
Fig.1 to 9
G13284200Courtesy of KIA MOTORS AMERICA, INC.
G13284201Courtesy of KIA MOTORS AMERICA, INC.
G13284202Courtesy of KIA MOTORS AMERICA, INC.
G13284203Courtesy of KIA MOTORS AMERICA, INC.
G13284204Courtesy of KIA MOTORS AMERICA, INC.
G13284205Courtesy of KIA MOTORS AMERICA, INC.
G13284206Courtesy of KIA MOTORS AMERICA, INC.
G13284207Courtesy of KIA MOTORS AMERICA, INC.
G13284208Courtesy of KIA MOTORS AMERICA, INC.