LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Engine Control System Diagnosis - 2.0L (2 Of 6)) >> DTC P0171-00: System Too Lean (Bank 1) >> DTC Inspection >> Monitor KDS Data

Monitor KDS Data

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
Inspection Condition Inspection Procedure Reference
  1. Engine "ON".
  1. Connect KDS to "Data Link Connector (DLC)".
  2. Monitor parameters in "Current Data" with KDS.
Fig. 1
G13291481Courtesy of KIA MOTORS AMERICA, INC.

Good 

  1. Fault might be intermittent and caused either by poor contact in connectors or wiring connector, or it has been repaired and control module memory is not cleared yet. Thoroughly check terminal of battery, all connectors (and connections) for looseness, bending, corrosion, contamination, deterioration, and/or damage.
  2. Repair or replace as necessary and then go to "Verification of Repair " procedure.

No Good 

  1. Go to "System Inspection " procedure.