LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Engine Starting System - 1.6L) >> Starter >> Repair Procedures >> Inspection >> Starter Brush

Starter Brush

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
  1. Brushes that are worm out, or oil-soaked, should be replaced.

    Brush length 

    Standard: 12.3 mm (0.4843 in)

    Service limit: 5.5 mm (0.2165 in)

    G13280739Courtesy of KIA MOTORS AMERICA, INC.
    NOTE:
    • To seat new brushes, slip a strip of #500 or #600 sandpaper, with the grit side up, between the commutator and each brush, and smoothly rotate the armature. The contact surface of the brushes will be sanded to the same contour as the commutator.