Circuit Inspection
WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|
| connector | Terminal | connector | Terminal | ||
|
HO2S (Bank 1, Sensor 2) connector | 1 (signal) | Chassis ground | - | Approx. 1.0V |
| HO2S (Bank 1, Sensor 2) connector | 2 (ground) | Chassis ground | - | Approx. 0.5V | |
|
HO2S (Bank 1, Sensor 2) connector | 1 (signal) | Chassis ground | - | ∞ (infinity)Ω |
| HO2S (Bank 1, Sensor 2) connector | 2 (ground) | Chassis ground | - | ∞ (infinity)Ω | |
| HO2S (Bank 1, Sensor 2) connector | 1 (signal) | ECM connector | 41 (signal) | Approx. below 1Ω | |
| HO2S (Bank 1, Sensor 2) connector | 2 (ground) | ECM connector | 57 (ground) | Approx. below 1Ω | |
Good
- Go to "Component Inspection " procedure.
No Good
- Repair or replace as necessary and then, go to "Verification of Repair " procedure.