Blind-Spot Collision Warning (BCW)

1. BCW on/off switch: On (indicated by the switch LED)
2. Vehicle Speed: 30 - 255 km/h (20 - 158 mile/h)
3. Relative vehicle speed: -10 to 255 km/h (-6 to 158 mile/h)

   (Negative value refers to the distance of the vehicle ahead.)

A to B: Blind spot zone

B to C: Closing vehicle zone

Courtesy of KIA MOTORS AMERICA, INC.

1. Conditions for blind spot zone warning ON
   1. The entire body of the target vehicle is located behind the line A.
   2. Any part of the target vehicle passes the line B.
   3. Any part of the target vehicle that passes line D and enters.
   4. The entire part of the target vehicle passes the line E.

   Courtesy of KIA MOTORS AMERICA, INC.

2. Conditions for blind spot zone warning OFF
   1. The entire body of the target vehicle is move behind the line B.1.
   2. The entire body of the target vehicle passes the line A.1.
   3. The entire body of the target vehicle passes the line D.1.
   4. The entire body of the target vehicle passes the line E.1.

   Courtesy of KIA MOTORS AMERICA, INC.

3. Conditions for closing vehicle zone warning ON
   1. The entire body of the target vehicle is located before the line B.
   2. Any part of the target vehicle passes the line D.
   3. The entire body of the target vehicle passes the line E.
   4. In the all above condition, TTC (Time to Collision) is less than 4.5(3.8) sec.

   Courtesy of KIA MOTORS AMERICA, INC.

4. Conditions for closing vehicle zone warning OFF
   1. The entire body of the target vehicle passes the line A.1.
   2. The entire body of the target vehicle passes the line D.1.
   3. The entire body of the target vehicle passes the line E.1.
   4. In the all above condition, TTC(Time to Collision) is more than 4.5(3.8) sec.

   Courtesy of KIA MOTORS AMERICA, INC.