LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Fuel Delivery System - 1.6L) >> Fuel Pump >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
  1. Release the residual pressure in fuel line.

    (Refer to Fuel Delivery System - "RELEASE RESIDUAL PRESSURE IN FUEL LINE ").

  2. Remove the rear seat.

    (Refer to Body - "REAR SEAT ASSEMBLY ")

  3. Remove the fuel pump service cover (A).
    G13280945Courtesy of KIA MOTORS AMERICA, INC.
  4. Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B).
  5. Disconnect the fuel feed tube quick connector (C) and the vapor tube quick-connector (D).
    G13280946Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the fuel pump grommet (A).
    G13280947Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the fuel pump plate cover (A) by using the SST (09310-2B200)
    G13280948Courtesy of KIA MOTORS AMERICA, INC.
  8. Remove the fuel pump from the fuel tank.
scientia non olet · About LEMON Manuals