LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Fuel Delivery System - 1.6L) >> Fuel Pressure Regulator >> Repair Procedures >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel pump.

    (Refer to Fuel Delivery System - "FUEL PUMP ")

  2. Disconnect the fuel pump motor connector (A) and fuel sender connector (B).
    G13280967Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the return nozzle (A) after releasing the hook (B).
    G13280968Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove cushion hook (A) and then remove the reservoir cup (B).
    G13280969Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the feed tube (A).
    G13280970Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the pre-filter (A).
    G13280971Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the fuel pressure regulator (A).
    G13280972Courtesy of KIA MOTORS AMERICA, INC.
  8. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals