Inspection Procedure
WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
- Check for software version on the BCW radar label. (reference-Fig.1)
Good
- Carefully re-do this troubleshooting guide steps.
- If no problems were found with the circuits or connectors, replace the BCW and go to "Verification of Repair " procedure.
- In case of BCW is replaced, "BCW Radar Calibration" must be performed.
No Good
- Repair as necessary and then go to "Verification of Repair " procedure.