Repair Procedures: Installation

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE:

The existing O-rings (A), (B) must be replaced with a new one. (Do not reuse it.)

Courtesy of KIA MOTORS AMERICA, INC.

Courtesy of KIA MOTORS AMERICA, INC.

After installing, check for leakage of coolant or fluid from hose connection during engine start.

Check the IVTF level after refilling the intelligent variable transmission (IVT) with fluid.
(Refer to Hydraulic System - " FLUID ")