LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Hydraulic System - 2.0L) >> Driven Pulley Control System Solenoid Valve (Secondary_VFS) >> Repair Procedures >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition Switch "OFF".
  2. Disconnect the battery negative (-) cable.
  3. Remove the air cleaner

    (Refer to Engine Mechanical System - AIR CLEANER

  4. Disconnect the IVT main connector (A).
    G00599904Courtesy of KIA MOTORS AMERICA, INC.
  5. Measure the resistance between power terminal (10) and signal terminal (7).

    Specification :  5.3± 0.3Ω

    G00599905Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals