LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Hydraulic System - 2.0L) >> Drive Pulley Control Solenoid Valve (Primary_VFS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Intelligent Variable Transmission (IVT) is composed of delicate components. Be careful not to cause any damage on the component when assembling and disassembling.
  • Maintain clean condition so that foreign substance does not get into the Intelligent Variable Transmission (IVT).
  • Use a coated apron, latex gloves, and stainless tray to prevent foreign substance from getting into the Intelligent Variable Transmission (IVT).
  1. Remove the E-Module.

    (Refer to IVT Control System - E-MODULE

  2. Remove the support bracket (A) after removing the bolts
    G00599906Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the drive pulley control solenoid valve (A).
    G00599910Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals