LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Engine Starting System - 2.0L) >> Starter >> Repair Procedures >> Inspection >> Free Running Inspection >> Overrunning Clutch

Overrunning Clutch

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
  1. Slide the overrunning clutch along the shaft.

    Replace it if does not slide smoothly.

  2. Rotate the overrunning clutch both ways.

    Does it lock in one direction and rotate smoothly in reverse? If it does not lock in either direction or it locks in both directions, replace it.

    G13283684Courtesy of KIA MOTORS AMERICA, INC.
  3. If the starter drive gear is worn or damaged, replace the overrunning clutch assembly. (the gear is not available separately).

    Check the condition of the flywheel or torque converter ring gear if the starter drive gear teeth are damaged.