Repair Procedures: Removal
WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch OFF and disconnect the negative (-) battery terminal.
- Remove the engine cover.
- Disconnect the ignition coil connectors (A).
- Remove the ignition coil after loosening the mounting bolts (B).
 Courtesy of KIA MOTORS AMERICA, INC.
|
NOTE:
- When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).
 Courtesy of KIA MOTORS AMERICA, INC.
|