LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Maintenance) >> Power Train >> Drive Belt >> Repair Procedures >> Removal And Installation >> [Gamma 1.6 T-GDI]

[Gamma 1.6 T-GDI]

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative terminal.
  2. Loosen the alternator mounting bolts (A) and then turn the adjusting bolt (B) counterclockwise to loose the drive belt tension.

    Tightening torque 

    M8 bolt:

    19.6 - 26.5 N.m (2.0 - 2.7 kgf.m, 14.5 - 19.5 Ib.ft)

    M10 bolt:

    29.4 - 41.2 N.m (3.0 - 4.2 kgf.m, 21.7 - 30.4 Ib.ft)

    G13280196Courtesy of KIA MOTORS AMERICA, INC.
    G13280197Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the drive belt (A).
    G13280198Courtesy of KIA MOTORS AMERICA, INC.
  4. Install in the reverse order of removal.