LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Maintenance) >> Power Train >> Cooling System >> Repair Procedures >> [Engine Coolant Filling Mode] >> * Conditions for Entering the Filling Mode

* Conditions for Entering the Filling Mode

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
  1. The shift lever is at the P position and the parking brake is applied.
  2. The engine is idle.
  3. The coolant temperature is 75°C(167°F) or above.
  4. The vehicle speed is 0 km/h.
  5. The heater is turned off.
  6. Perform the work indoors to help raise the coolant temperature.
  7. Perform the "ENGINE COOLANT FILLING MODE 
    G13280188Courtesy of KIA MOTORS AMERICA, INC.
  8. After confirming that the condition of the vehicle is satisfied with the inspection condition, and then press the "OK" button.
    G13280189Courtesy of KIA MOTORS AMERICA, INC.
  9. Check the engine coolant filling mode entry conditions and then press the "Read" to check the current coolant temperature.
    G13280190Courtesy of KIA MOTORS AMERICA, INC.
  10. Check the current coolant temperature and then press the "OK".
    G13280191Courtesy of KIA MOTORS AMERICA, INC.
    NOTE: The current temperature of coolant is above 75°C (167°F), engine coolant filling mode can be performed.
  11. If the coolant temperature is above 75°C (167°F), press the "OK" to performing engine coolant fill mode.
    G13280192Courtesy of KIA MOTORS AMERICA, INC.
  12. The engine coolant filling mode is maintained until the temperature of coolant becomes 75°C (194°F).
    G13280193Courtesy of KIA MOTORS AMERICA, INC.
  13. When the engine coolant filling mode completed, press the "OK".
    G13280194Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals