Air Bleeding Procedure for ESC Brake (Step 3) [Brake Bleeding Reinforcement]
WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
Information
The Step 3 procedure proceeds when there is noise during ESC module replacement or AVH release.
- Perform the same operation as the Air Bleeding Procedure for ESC Brake (Step 1).
- Release the brake pedal.
- Check the brake pedal stroke.
Pedal stroke: 135 ± 3 mm (5.3149 ± 0.1181 in.)
- Refill the master cylinder reservoir to MAX (upper) level line.
- Install the wheel and tire.
(Refer to Suspension System - "WHEEL ")