Inspection Procedure
WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition "ON".
- Measure the voltage between (+) terminal and (-) terminal of battery.
- Specification: Approx. over 11V
- Is the measured value within specification?
Good
- Carefully re-do this troubleshooting guide steps.
- If no problems were found with the circuits or connectors, replace the ECM and go to "Verification of Repair " procedure.
No Good
- Repair as necessary and go to "Verification of Repair " procedure.