LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Head Up Display Diagnosis) >> DTC B2853-00: No HUD Flection Correction(HUD Not Warped), MM CAN Signal Line Error >> Wiring Inspection >> Circuit Inspection

Circuit Inspection

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
G13287741Courtesy of KIA MOTORS AMERICA, INC.
Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
  1. Ignition "OFF".
  2. Disconnect the electrical connector(s) from the concerned component.
  3. Ignition "ON"
 HUD connector 5 (M-CAN high) Chassis ground - Fig. 1
HUD connector 6 (M-CAN low) Chassis ground -
G13287742Courtesy of KIA MOTORS AMERICA, INC.

Good 

  1. Go to "System Inspection " procedure.

No Good 

  1. Repair as necessary and then go to "Verification of Repair " procedure.
scientia non olet · About LEMON Manuals