LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Head Up Display Diagnosis) >> DTC B1603-00: CAN Bus OFF (C CAN) >> DTC Inspection >> Monitor DTC Status

Monitor DTC Status

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS to "Data Link Connector (DLC)".
  2. Monitor "Diagnostic Trouble Codes (DTC)" with KDS.
 Fig. 1
G13287732Courtesy of KIA MOTORS AMERICA, INC.

Active Fault 

  1. Go to "Wiring Inspection " procedure.

History/Pending Fault 

  1. Fault is intermittent caused by poor contact in HUD connector's connector or was repaired and HUD connector memory was not cleared.
  2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.
  3. Repair or replace as necessary and go to "Verification of Repair " procedure.
scientia non olet · About LEMON Manuals