Removal And Installation

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.

Remove the engine room under cover.
(Refer to Engine and transmission Assembly - "ENGINE ROOM UNDER COVER ")
Remove the oil drain plug, and drain the oil into a container.
(Refer to Lubrication System - "ENGINE OIL ")
Disconnect the connector (A) and remove the oil pressure switch (B).

Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.

NOTE: When installing the oil pressure switch, apply seal lock to the thread.
Seal lock : THREEBOND 2403
Thickness : 0.2 - 0.4 mm (0.008 - 0.016 in.)

Courtesy of KIA MOTORS AMERICA, INC.