Repair Procedures: Inspection
WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
- Check the continuity between the terminal and the body with an ohmmeter.
If there is no continuity, replace the oil pressure switch.
- Check the continuity between the terminal and the body when the fine wire is pushed.
If there is continuity even when the fine wire is pushed, replace the switch.
- If there is no continuity when a 19.6-39.2kpa (0.2-0.4kg/cm2
, 2.8-5.6 psi) is applied through the oil hole, the switch is operating properly.
Check for air leakage. If air leaks, the diaphragm is broken.
Replace it.