Bearing Bracket & Shaft Assembly

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front drive shaft.
Remove the bearing bracket & shaft assembly (A).
Tightening torque:

39.2 - 63.7 N.m (4.0 - 6.5 kgf.m, 28.9 - 47.0 lb.ft)

Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.
Check the front alignment.
(Refer to Suspension System - "FRONT ALIGNMENT ")