Special Service Tools
WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
Information
| Tool Name/Number | Illustration | Description |
|---|---|---|
| Engine support fixture (bar) 09200-3N000 |
Used for holding engine assembly when removing/installing transmission Used with the supporter (09200-2S000) adapter (09200-4X000) * Refer to the engine support fixture assembly drawing below. |
|
| Engine support fixture assembly 09200-2S000 Engine support fixture 09200-2S100 09200-2S200 |
Used for holding engine assembly when removing/installing transaxle Used with the bar (09200-3N000) and adapter (09200-4X000) * Refer to the engine support fixture assembly drawing below. |
|
| Engine support fixture (adapter) 09200-4X000 |
Used for holding engine assembly when removing/installing transmission Used with the bar (09200-3N000) and supporter (09200-2S000) * Refer to the engine support fixture assembly drawing below. |
|
| Oil seal installer 09430-C1190 |
Installation of transaxle case oil seal. Used with the handle (09231-H1100) |
|
| Handle 09231-H1100 |
Installation of transaxle case oil seal. Used with the installer (09430-C1190) |
|
| Inhibitor switch guide pin 09480-A3800 |
Used for fixing "N" range when installing inhibitor switch | |
| Dual clutch remover 09430-C1180 |
Used for removing dual clutch assembly | |
| Dual clutch installer 09430-2A240 |
Used for installing dual clutch assembly | |
| Clutch actuator remover 09430-A5100 |
Used for removing clutch actuator assembly | |
| Clutch actuator adjuster 09430-C1300 |
Used for adjusting clutch actuator Used with the clutch actuator adjustment jig (09430-C1302) |
|
| Clutch actuator adjustment jig 09430-C1302 |
Used for adjusting clutch actuator Used with the clutch actuator adjuster (09430-C1300) |
* Engine support fixture special tool assembly drawing