LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Fuel Delivery System - 2.0L) >> Fuel Pump Motor >> Repair Procedures >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel pump.

    (Refer to Fuel Delivery System - "FUEL PUMP ")

  2. Disconnect the fuel pump motor connector (A) and fuel sender connector (B).
    G13283866Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the return nozzle (A) after releasing the hook (B).
    G13283867Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove cushion hook (A) and then remove the reservoir cup (B).
    G13283868Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the feed tube (A).
    G13283869Courtesy of KIA MOTORS AMERICA, INC.
  6. Remove the pre-filter (A).
    G13283870Courtesy of KIA MOTORS AMERICA, INC.
  7. Disconnect the ground cable (A).
    G13283871Courtesy of KIA MOTORS AMERICA, INC.
  8. Remove the fuel motor (A) from the fuel filter (B)
    G13283872Courtesy of KIA MOTORS AMERICA, INC.
  9. Install in the reverse order of removal.