LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Body Side Molding) >> Rear Wheel Guard >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Put on gloves to prevent hand injuries.
NOTE:
  • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
  • Take care not to scratch the body surface.
  1. Remove the rear tire.
  2. After loosening the mounting screws and clips, remove the rear wheel guard (A).
    G13281971Courtesy of KIA MOTORS AMERICA, INC.
  3. Install in the reverse order of removal.

    Information 

    Replace any damaged clips (or pin-type retainers).

scientia non olet · About LEMON Manuals