LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Engine Control System - 2.0L) >> ETC (Electronic Throttle Control) System >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the air cleaner.

    (Refer to Engine Mechanical System - "AIR CLEANER ")

  3. Disconnect the ETC module connector (A).
  4. Remove the ETC module mounting bolts (B).

    Electronic throttle body mounting bolt: 

    7.8 - 11.8 N.m (0.8 - 1.2 kgf.m, 5.8 - 8.7 lb.ft)

    G13283746Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the coolant hoses (A).
  6. Remove the ETC module (B) from the engine.
    G13283747Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals