LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 36 (Engine Control System - 2.0L) >> Canister Close Valve (CCV) >> Repair Procedures >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the canister close valve extension connector (A).
  3. Disconnect the ventilation hose (A).
  4. Remove installation clip (B) and then remove the fuel tank air filter & canister close valve.
    G13283835Courtesy of KIA MOTORS AMERICA, INC.
  5. Separate the canister close valve (A) from the fueltank air filter (B).
    G13283836Courtesy of KIA MOTORS AMERICA, INC.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals