Repair Procedures: Removal

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.

Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
Disconnect the CVVT oil control valve connector (A).
Remove the mounting bolt (B), and then remove the valve from the engine.
CVVT oil control valve mounting bolt:

9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

[Bank 1/Intake]

Courtesy of KIA MOTORS AMERICA, INC.

[Bank 1/Exhaust]

Courtesy of KIA MOTORS AMERICA, INC.