Removal & Installation

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.

Turn the ignition switch OFF and disconnect the battery (-) terminal.
Remove the front bumper assembly.
(Refer to Body - "FRONT BUMPER ASSEMBLY ")
Disconnect the connector (A) and then remove the ambient temperature sensor (B).

Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.

NOTE: Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.