Removal And Installation: Resonator

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.

Remove the front wheel guard.
(Refer to Body (Interior and Exterior) - "FRONT WHEEL GUARD ")
Remove the engine room under cover.
(Refer to Engine and Transaxle Assembly - ENGINE ROOM UNDER COVER ")
Remove the wiring mounting clips (A).

Courtesy of KIA MOTORS AMERICA, INC.
Remove the resonator (A).
Tightening torque:

3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb.ft, 35.4 - 53.1 lb.in)

Courtesy of KIA MOTORS AMERICA, INC.
Install in the reverse order of removal.