LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Rear Seat Assembly) >> Rear Seat Assembly >> Repair Procedures >> Replacement >> [Rear Seat Back Assembly]

[Rear Seat Back Assembly]

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the luggage covering board (A).
    G13282230Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the center seat belt (A) by pushing it with an awl.
    G13282231Courtesy of KIA MOTORS AMERICA, INC.
  3. Pull up the rear seat back assembly (A) by pulling the stand-up lever.
    G13282232Courtesy of KIA MOTORS AMERICA, INC.
  4. After loosening the mounting bolts, remove the rear seat back assembly (A).

    Tightening torque:

    16.7 - 25.3 N.m (1.7 - 2.6 Kgf.m, 12.3 - 18.8 lb.ft)

    G13282233Courtesy of KIA MOTORS AMERICA, INC.
  5. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals