ECM Mirror
WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Put on gloves to prevent hand injuries.
- Remove the ECM mirror cover (A).
- Disconnect the ECM mirror connector (A).
- Loosen the mounted screws and push the ECM mirror base upward to remove the ECM mirror assembly (A).
Tightening torque:
1.5 - 2.0 N.m (0.15 - 0.2 Kgf.m, 1.1 - 1.4 lb.ft)
- To install, reverse removal procedure.
Information
- Make sure the connector is connected properly.
- Be careful not to damage the windshield glass.