Repair Procedures: Replacement
WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the plug hole and loosen the mounting bolt, remove the rear door outside handle (A).
Tightening torque
3.9 - 5.9 N.m (0.4 - 0.6 kgf.m, 2.9 - 4.3 lb.ft)
- To install, reverse removal procedure.
Information
- Make sure the door locks/unlocks and opens/closes properly.
- Be sure to install the outside handle pad (A) between the outside handle and the door panel.