LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Front Door Assembly) >> Front Door Outside Handle >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door trim.

    (Refer to Front Door - "FRONT DOOR TRIM ")

  2. Remove the plug hole (B).
  3. After loosening the mounting bolt, remove the front door outside handle cover (A).

    Tightening torque: 

    3.9 - 5.9 N.m (0.4 - 0.6 Kgf.m, 2.9 - 4.3 lb.ft)

    G13281911Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the front door outside handle (A) by sliding it forward.
    G13281912Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the front door outside handle connector (A).
    G13281913Courtesy of KIA MOTORS AMERICA, INC.
  6. To install, reverse removal procedure.

    Information 

    • Make sure the connector is connected properly.
    • Make sure the door locks/unlocks and opens/closes properly.
    • Be sure to install the outside handle pad (A) between the outside handle and the door panel.
G13281914Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals