Repair Procedures: Installation
WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
- Install in the reverse order of removal.
NOTE:
- Check the following before installing the gear actuator assembly.
- Check that the gear actuator is placed in the "neutral" state.
- Check the assembled state of the O-rings (A).
- Apply gear oil to the surface of O-rings.
- Check the assembled state of the dowel pins (A).
- Perform the clutch touch point learning procedure using the KDS after replacing the gear actuator assembly.