Tie Rod End
WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the tie rod end after loosening the nut.
Tightening torque:
49.0 - 53.9 N.m (5.0 - 5.5 kgf.m, 36.2 - 39.8 lb.ft)
NOTE: Before removing the tie rod end, take the measurement or mark with paint the length of the thread. - Replace the tie rod end.
- Check the alignment.
(Refer to Suspension System - "FRONT ALIGNMENT ")