Cooling Fan Controller (PWM)
WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the air duct (A).
 Courtesy of KIA MOTORS AMERICA, INC.
|
- Disconnect the cooling fan controller connector (A) and cooling fan connector (B).
 Courtesy of KIA MOTORS AMERICA, INC.
|
- Remove the cooling fan controller (A).
Tightening torque:
4.9 - 8.3 N.m (0.50 - 0.85 kgf.m, 3.6 - 6.1 lb.ft, 0.43 - 0.74 lb.in)
 Courtesy of KIA MOTORS AMERICA, INC.
|
- Install in the reverse order of removal.