LEMON Manuals: Even more car manuals for everyone
Home >> Kia >> 2020 >> Soul GT Line Turbo >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Engine Control System Diagnosis (1 Of 6)) >> DTC P0016-00: Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor A (Intake)) >> Wiring Inspection >> Circuit Inspection

Circuit Inspection

WARNING: This page is about a different car, the 2025 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
G15728618Courtesy of KIA MOTORS AMERICA, INC.
G15728619Courtesy of KIA MOTORS AMERICA, INC.
Inspection Condition (+) Probe (-) Probe Specification
Connector Terminal Connector Terminal
  1. Ignition "OFF".
  2. Disconnect OCV - In (Bank 1) connector.
  3. Ignition "ON".
OCV - In (Bank 1) connector 2 (power) Chassis ground - B+
OCV - In (Bank 1) connector 1 (control) Chassis ground - Approx. 1.4V
  1. Ignition "OFF".
  2. Disconnect the electrical connector(s) from the concerned component.
OCV - In (Bank 1) connector 1 (control) Chassis ground - ∞ (infinity) Ω

Good 

No Good