DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.

Item	Detecting Condition	Possible Cause
DTC Strategy	Not enough motion of select2 solenoid while engaging gear	Faulty gear select assembly Faulty DCT Mechanical failure on gear2 select direction
Enable Condition	When 2nd gear is engaged Battery voltage higher than 10V No electrical failure on select solenoid2
Threshold Value	Select solenoid2 position error is over 1mm
Fail Safe	Drive at odd gear
Detecting Time	3 events
MIL ON Condition	2 driving cycles