Circuit Inspection
WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
Transaxle range switch connector | 7 (power) | Chassis ground | - | B+ |
|
Transaxle range switch connector | (P-R-N-D) | Chassis ground | - | See below "Inhibitor switch specification" |
| NO | P | P-R | R | R-N | N | N-D | D |
|---|---|---|---|---|---|---|---|
| S1 | 12V | 12V | 0 | 0 | 0 | 0 | 0 |
| S2 | 0 | 12V | 12V | 12V | 0 | 0 | 0 |
| S3 | 0 | 0 | 0 | 12V | 12V | 12V | 0 |
| S4 | 0 | 0 | 0 | 0 | 0 | 12V | 12V |
Good
- Go to "Component Inspection " procedure.
- Repair as necessary and then go to "Verification of Repair " procedure.
No Good
- Repair open or short in circuit and then go to "Verification of Repair " procedure.