DTC P0704-00: Clutch Switch Input Circuit Malfunction: General Description
WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
Clutch switch is connected to clutch pedal and transmits clutch operating state to PCM.
When clutch pedal is depressed during driving, engine load changes from loaded to none loaded condition. However, PCM regards vehicle to be loaded because VSS signal is still inputted to it. therefore, PCM controls none loaded engine with the condition suitable for loaded engine.
Accordingly, optimum fuel injection control is not performed then, RPM becomes unstable and smoke is produced.
Clutch operation is detected through clutch switch signal. This signal enables PCM to cope with instant change of load condition.
Besides, clutch switch signal is used to detect engaged gear with vehicle speed and engine speed.