Circuit Inspection
WARNING: This page is about a different car, the 2021 Kia Soul. However, it is still accessible from the selected car via links, so may be relevant.
| Module Circuit Inspection | |||||
|---|---|---|---|---|---|
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
| Connector | Terminal | Connector | Terminal | ||
|
ALR sensor connector | 1 (ALR+) | Chassis ground | - | ∞ (infinity)Ω |
| ALR sensor connector | 2 (ALR-) | Chassis ground | - | ∞ (infinity)Ω | |
| ALR sensor connector | 1 (ALR+) | OCS ECU connector | 5 (ALR+) | Approx. below 1Ω | |
| ALR sensor connector | 2 (ALR-) | OCS ECU connector | 6 (ALR-) | Approx. below 1Ω | |
Good
- Carefully re-do this troubleshooting guide steps.
- If problem still occurs, replace ALR sensor and then go to "Verification of Repair " procedure.
No Good
- Repair as necessary and then go to "Verification of Repair " procedure.