Circuit Inspection

G13286948

Courtesy of KIA MOTORS AMERICA, INC.

Inspection Condition	(+) Probe		(-) Probe		Specification
Inspection Condition	connector	Terminal	connector	Terminal	Specification
Ignition "OFF". Disconnect the electrical connector(s) from the concerned component. Ignition "ON".	BVS connector	3 (power)	Chassis ground	-	Approx. 5V
	BVS connector	1 (signal)	Chassis ground	-	Approx. 5.6V
Ignition "OFF". Disconnect the electrical connector(s) from the concerned component.	BVS connector	2 (ground)	Chassis ground	-	Approx. below 1Ω

Good

Go to "Verification of Repair " procedure.

No Good

Carefully re-do this troubleshooting guide steps.
If no problems were found with the circuits or connectors, replace the BVS and go to "Verification of Repair " procedure.